-
The BigFoot gunnel style canoe carrier, with it's wide padded base and small load bar footprint fits most aftermarket and factory cross rails. The perfect choice for a carrier that delivers safe transport from the driveway to the water's edge. Featuring corrosion resistant nylon construction that ensures years of service. Includes straps, hardware and safety tie-downs for one canoe.
Note: The base of the carrier has a rectangular "cutout" that has been included for square cross bar fit. This "cutout" does not effect the fit or function of the carriers when installed to round or oval shaped...
-
The Channel Loader™ is an incredibly simple to use kayak loader that works with nearly any vehicle and fits most boat hull configurations.
The design includes an extra tall frame that reaches over most spoilers, and, a narrow footprint to allow loading of two kayaks on the vehicle's rooftop.
Other features include an oversized 10" wide conical roller that improves boat control and a three-position adjustment system to match any angular loading requirement. The heavy-duty toggle activated vacuum cups have non-marking pads that protect the vehicle's sheet metal from abrasion.
Stores in the boot...
-
The Clipper™TRX, with its time proven performance, is the perfect solution for transporting boats with traditionally designed (V-style) hulls. Transport up to 200 pounds (90 kg). Constructed of tough marine grade aluminum and finished with a silver anodized surface, the Clipper™TRX is built to provide years of dependable service. Features include adjustable rubber padding, corrosion resistant hardware and twin kick-stands for stable loading.
Each cart is also outfitted with dual on-board cam style load straps and TRX "Never Go Flat" tires. With the integrated push button wheel release system...
-
• Universal fit JAWZ mounting hardware
• Fold-down design for low clearance
• Rotational hubs feature single touch slide locks
• Fully padded to protect the kayak
• Dimensions: 35 (L) x 15 (W) x 40 cm (H
-
The MPG125 FoldAway-5™ can carry a single recreational or touring kayak on it's side, vertically stack two kayaks, carry a canoe or large sit-on-top kayak, and transport any size SUP. Featuring a pair of quick-release fold-down frames with removable 2-boat modules for transporting wide loads. Each set of carriers are built with corrosion resistant coated steel, thick over-sized padding and heavy duty molded parts.
The universal mounting system fits a large cross section of aftermarket load bars (round, square and oval) as well as most factory systems. Also includes two lengths of mounting...
-
The MPG132 FoldAway-J™ is exclusively designed to safely carry a single recreational or touring kayak on its side. These carriers feature quick-release fold-down frames for low clearance & improved gas mileage when not in use. Built with corrosion resistant coated steel, over-sized padding, heavy duty molded parts and a unique mounting design.
This universal mounting system fits a large cross section of aftermarket load bars (round, square and oval) as well as most factory systems. The dual mount locations ensure the carriers are firmly in place and eliminate side to side movement. Also...
-
Malone FS Storage Racks are the perfect solution for safe "put away" and quick access. Designed for ease of assembly and built with heavy gauge steel, this system will satisfy your storage requirements on the first day and for years to come. Easy to assemble and built with a powder coated heavy gauge steel that will last for years. High capacity J-style holders protect the kayaks from wear and abrasion. Accommodates most boats profiles. Lifetime warranty.
For increased mobility, replace the standard frame levelers with the MPG333 Caster Wheel Kit. Each caster has an adjustable height and...
-
The J-Pro2 is Malone's upgraded J-Cradle carrier with enhanced foam padding and polyester sleeves to better protect the kayak. Fits most sit-inside and sit-on-top kayaks. This mid-priced carrier features a silver finish with multiple layers of corrosion resistant coating, universal fit hardware and a Lifetime Warranty.
Note: The base of the carrier has a rectangular "cutout" that has been included for square cross bar fit. This "cutout" does not effect the fit or function of the carriers when installed to round or oval shaped cross bars.
Note: All Malone carriers come with two lengths of...
-
The Nomad™TRX conveniently fits in most kayak hatches. Works best for transporting kayaks with traditional V-style hulls. Transport up to 150 pounds (68 kg). Constructed of tough marine grade aluminum and finished with a silver anodized surface, the Nomad™TRX is built to provide years of dependable service. Features include adjustable rubber padding, corrosion resistant hardware and full size kick-stand for stable loading.
Each cart is outfitted with a single on-board cam style load strap and TRX "Never Go Flat" tires. With the integrated push button wheel release system, the need for wheel...
-
The SaddleUp is a great way to transport larger touring, sit-on-top and fishing kayaks. The MPG110MD features four high-grip self-adjusting saddles. Each set includes two rear saddle covers that allow the boat to easily slide into place. Comes complete with hardware, straps and safety tie-downs for one kayak.
Note: The base of the carrier has a rectangular "cutout" that has been included for square cross bar fit. This "cutout" does not effect the fit or function of the carriers when installed to round or oval shaped cross bars.
Note: All Malone carriers come with two lengths of installation...
-
The SeaWing is Malone's signature design that is easy to install and works with most recreational and sea kayaks. There is no requirement to lift the entire kayak at any time. Simply position the front of the kayak on the rear of the vehicle; move to the rear of the kayak and push it up to load. To better protect the vehicle and kayak, the optional MPG350 Stinger Kayak Load Assist is available separately. Constructed with non-corrosive molded frame engineering that assures a rust free and long life cycle. Features include universal fit mounting hardware and Lifetime Warranty.
Note: The base...
-
Add the MPG350 Stinger Load Assist Module to your existing MPG107 SeaWing for a great transport system that simplifies loading and protect the kayak and vehicle.
What's in the box?
(1) Stinger Extension
(1) Stinger Base Plate
(1) Stinger V-block with Low Friction Pad
(1) Stinger Hardware Kit
(1) Instruction Manual
-
Protect your investment with The MPG357 LockUp cable lock. This system has state-of-the-art technology with anti-drill, anti-saw and anti-pick features. Heavy duty 12mm thick multi-coaxial cables prevent opportunistic theft.
New 2019 model has a smaller lock device, one that can easily slide into scupper holes or seat attachments on kayaks.
Sold in a single 10' length. Good for multiple bikes. One Year Warranty.
Note: Cable locks prevent opportunistic theft. This security cable system is not intended to be anti-theft.
What's in the box?
(1) 10' LockUp Cable
(2) Keys
-
The Stax Pro2 is the combination of intelligent design, excellent workmanship, superior strength and affordable pricing. This two boat transport system delivers a safe and secure trip to the water and back and assures a great paddling experience. Features a fold-down frame design for low clearance and foam blocks to protect the kayaks from cross bar abrasion. Comes with all required straps, mounting hardware and safety lines to safely transport two kayaks.
Note: The base of the carrier has a rectangular "cutout" that has been included for square cross bar fit. This "cutout" does not effect...
-
T Track Adaptor for Malone racks.
MPG915 T-slot Mounting Kit replaces the standard MPG300 series mounting kits that contain Jawz, T-knobs and M8 mounting bolts. The MPG915 utilizes the T-slot in all Malone aero bars and most aftermarket aluminum load bars with T-slots.
Provides a seamless look to the carrier installation and allows more under bar clearance. Fits the MPG110 SaddleUp, MPG112 BigFoot, MPG115 Stax Pro2 and MPG119 Maui. Sold in sets of four. Lifetime Warranty.
MPG6604 T-slot Mounting Kit replaces the standard MPG300 series mounting kits that contain Jawz, T-knobs and M8 mounting...
-
The Telos™XL temporarily attaches to J-style carriers (DownLoader™ - J-Loader™ - AutoLoader™) and the SeaWing™ V-style carriers. This lift assist provides a safe way to vertically raise the kayak into a position where it can easily be loaded into the carriers. You can detach the Telos™ XL and use it on the other side of the vehicle to load your second kayak, or, store it in the trunk for unloading later. The new ground level adjustable extensions totally avoid contact with the vehicle's sheet metal. There is simply no other load assist on the market with this versatility or value. Comes with...
-
The Xpress™TRX adjusts from 5.5" to 23" wide allowing it to fit nearly all scupper style kayaks. The padded uprights protect the hull from abrasion and firmly hold the kayak in place during transport. With a maximum load rating of 150 lb (68 kg), these carts can handle most sit-on-top recreational boats with gear. Constructed of tough marine grade aluminum and finished with a silver anodized surface for long term dependable service. Features include adjustable mark-proof rubber padding, corrosion resistant hardware and a fold-away kick-stand for stationary stability.
Each cart includes TRX...